PEEK Laboratory Tubing
All ARE-Applied Research™ brand PEEK laboratory tubing is extruded from virgin PEEK
material which ensures that extractables are not present as with lower cost brands and
that our tubing will not affect your chromatography results.
It is important to note that color coded PEEK tubing could cause stability problems with
some solvents and additives. However for most applications it is safe to use and easy to identify
the internal diameter of the tubing from the color of the tubing. We do not add any additives except for color particles in the solid colored tubing.
We recommend using Striped or natural tubing, because PEEK is not stable to all chemicals. Some solvents may react with the
PEEK wall material and dissolve the color particles. Be aware of the limitations of PEEK material concerning solvents, temperature
and pressure. Striped colored tubing consists of the same natural PEEK tubing with out color added but a stripe is added to the
outside of the tubing after extrusion for easy identification. If you are unsure, please get advice before using PEEK tubing.
Ultra-T™ tubing (Extra-low tolerance) +/- 0.025 mm ID and OD
Double Striped color
| P/N | Description | Pressure
bar/psi) |
|---|
| 41.159.006.90 | Tubing, PEEK, 1/16" OD x 0.064 mm ID, natural | 435 / 6300 |
| 41.159.013.91 | Tubing, PEEK, 1/16" OD x 0.13 mm ID, red | 420 / 6100 |
| 41.159.018.92 | Tubing, PEEK, 1/16" OD x 0.18 mm ID, yellow | 400 / 5800 |
| 41.159.025.93 | Tubing, PEEK, 1/16" OD x 0.25 mm ID, blue | 385 / 5600 |
Standard tolerance tubing +/- 0.05 mm ID and OD
Striped color
| P/N | Description | Pressure
(bar/psi) |
|---|
| 41.159.013.01 | Tubing, PEEK, 1/16" OD x 0.13 mm ID, red | 420 / 6100 |
| 41.159.018.02 | Tubing, PEEK, 1/16" OD x 0.18 mm ID, yellow | 400 / 5800 |
| 41.159.025.03 | Tubing, PEEK, 1/16" OD x 0.25 mm ID, blue | 385 / 5600 |
| 41.159.050.04 | Tubing, PEEK, 1/16" OD x 0.50 mm ID, orange | 350 / 4500 |
| 41.159.075.05 | Tubing, PEEK, 1/16" OD x 0.75 mm ID, green | 240 / 3500 |
| 41.159.100.06 | Tubing, PEEK, 1/16" OD x 1.0 mm ID, grey | 165 / 2400 |
| 41.159.140.07 | Tubing, PEEK, 1/16" OD x 1.4 mm ID, black | 50 / 750 |
All Natural - No Color
| P/N | Description | Pressure
(bar/psi) |
|---|
| 41.036.007.00 | Tubing, PEEK, 360 µm OD x 75 µm ID | 355 / 5200 |
| 41.079.013.00 | Tubing, PEEK, 1/32" OD x 0.13 mm ID | 380 / 5500 |
| 41.079.018.00 | Tubing, PEEK, 1/32" OD x 0.18 mm ID | 350 / 5100 |
| 41.079.025.00 | Tubing, PEEK, 1/32" OD x 0.25 mm ID | 310 / 4500 |
| 41.318.075.00 | Tubing, PEEK, 1/8" OD x 0.75 mm ID | 345 / 5000 |
| 41.318.159.00 | Tubing, PEEK, 1/8" OD x 1/16 ID | 220 / 3200 |
| 41.318.200.00 | Tubing, PEEK, 1/8" OD x 2.0 mm ID | 165 / 2400 |
| 41.635.318.00 | Tubing, PEEK, 1/4" OD x 1/8" ID | 225 / 3300 |
Solid color - Economical
| P/N | Description | Pressure
(bar/psi) |
|---|
| 41.159.013.51 | Tubing, PEEK, 1/16" OD x 0.13 mm ID, red | 420 / 6100 |
| 41.159.018.52 | Tubing, PEEK, 1/16" OD x 0.18 mm ID, yellow | 400 / 5800 |
| 41.159.025.53 | Tubing, PEEK, 1/16" OD x 0.25 mm ID, blue | 385 / 5600 |
| 41.159.050.54 | Tubing, PEEK, 1/16" OD x 0.50 mm ID, orange | 350 / 4500 |
| 41.159.075.55 | Tubing, PEEK, 1/16" OD x 0.75 mm ID, green | 240 / 3500 |
Note: The data collected in column ’Pressure’ show
the recommended permanent maximum working pressure at room temperature for non-destructive solvents.
Change of solvents and temperature may result in lowered mechanical stability.
Note: Tight bends of the tubing, use of wrong tools for cutting and bad connections
may result in mechanical damage to the tube and by this reduce the pressure stability.